Brochure

08/02/2010Etere Redundancy Switch - ET0558 B

Etere ET0558-B is a redundancy switch used to switch the control of devices between main/backup controllers, devices can be connected via GPI or Serial.

• The device is based on relay switching so its connections are fully bidirectional. • Etere Redundancy Switch does not make any noise or modify the signal to be switched and the switching is relay controlled.
• Lines are independent from one to another, any protocol can be used.
• The switching can be manual from the front panel, via a remote controlled GPI or by Etere Automation.
• Use of two power supply for redundancy. • When used with Etere Automation, ET0558 sends SNMP error traps in case one of its power supplies is defective. • One ET0558-B is required for each playout channel.



CAPABILITIES

• 25 GPI lines on DB25 connection,
• 8 serial lines on RJ45 connector,
• Remote control on RJ45 connector,
• All the pins of the RJ45 are switched via relays.


TECHNICAL FEATURES

• Serial connectors 8
• No. outputs on RJ45 8
• No. Serial lines switched 8
• No. GPI lines switched 25
• GPI connector DB25
• Switching current 300mA max. • Switching voltage 50Vcc/Vca max. • Optical information Output channel
• Temperature field from + 5 to + 45° C
• Relative humidity < 90 % non condensing
• AC supply 220 V 47-63 Hz
• AC consumption < 90 VA
• Dimensions Rack standard 19" 1 U (mm.) 45 (H)x 442 (W)x 245 (D)
• Weight 1,9 kg